Neglecting details during office decoration construction may drag down the entire project. The editor has summarized 10 common key points, including ground leveling, cable tray depth, and ceiling materials, to ensure quality and avoid rework. Let's take a look together~

1. Ground assessment: The flatness of the ground is the foundation of decoration, which directly affects the subsequent floor laying and the effectiveness of the office environment. If the ground is uneven, a 1:3 cement mortar or self leveling material can be used for leveling to ensure smooth subsequent construction.

2. The depth and width of the cable tray must be planned in advance. The depth of a general wire trough is 3-5 centimeters and the width is 5-10 centimeters, which should be determined according to the number of lines and the diameter of the conduit. If the cable tray is not deep enough, the laying of the conduit may cause uneven ground and affect the overall effect.

3. Ceiling construction: If the office requires a ceiling, it is necessary to ensure that the indoor sprinkler outlets comply with fire safety regulations and expose a certain size of the ceiling surface. This type of work needs to be completed by a professional team to ensure that the construction quality meets fire safety requirements.

When installing smoke detectors to separate new spaces, smoke detectors must be added according to fire safety requirements. This work must be carried out by a professional fire maintenance unit to ensure that it can pass the fire inspection.

5. Weak current renovation of weak current systems (including networks and telephone lines) is one of the key focuses of office decoration. During the wiring process, it is necessary to label the data and voice lines in advance to ensure that they will not be confused during future use and avoid rework in the future.

6. Network cabling in offices requires the use of steel pipes instead of PVC pipes commonly used in home decoration. This is because office buildings have higher requirements for safety and durability, and the use of steel pipes can effectively protect the wiring.

7. Central air conditioning and air outlet renovation: Some office buildings have their own central air conditioning systems, but the air outlets may not meet the new layout requirements. At this point, the designer must plan the position of the air outlet in advance and cooperate with the ceiling project to ensure the normal operation of the air conditioning and fresh air system.

When decorating the wall, the foundation treatment of the wall is crucial. After applying putty, it must be completely dry before proceeding with subsequent treatment to prevent cracks or peeling on the wall.

9. Whether it is asbestos board or mineral wool board ceiling, it must be fixed with screw rods to ensure the stability and durability of the ceiling. Using wire suspension is not only unsafe, but it may also cause the ceiling to fall, posing a safety hazard.

10. Strong and weak electrical wiring should be synchronized with the installation of office partitions to ensure that the power and network connections of each workstation are in place. When wiring, pay attention to cleanliness and avoid disorderly pulling and placing to prevent safety hazards in the later stage.

The above. If you have any further decoration needs, please feel free to consult with Easy Construction at any time. We will be dedicated to serving you.